current location：Home > Product > Aging box series
Aging box series

Low temperature test chamber

Tel：0510-83072116 Q Q：779243575

Detailed

Product use:

A series of low temperature test chamber is mainly used to assess or determine the electrical and electronic products (including components, equipment and other products)

Suitability for storage and / or use at low temperatures.

Product specification:

Model	Studio size（mm）	Outline dimension（mm）
DW-50	320×350×450	800×800×1260
DW-100	400×450×550	900×900×1540
DW-150	500×500×600	932×985×1690
DW-225	500×600×750	932×1050×1710
DW-408	600×800×850	1000×1250×1830
DW-500	700×800×900	1182×1250×1880
DW-800	800×1000×1000	1485×1520×2020
DW-010	1000×1000×1000	1500×1520×2300

Operation mode			fixed value operation
Technical parameters		temperature range	10 from-20 DEG C, C, C, and 40 - 60 - 70 DEG
		temperature fluctuation	+ 0.5 DEG
		temperature uniformity	is not higher than 2 DEG
		temperature deviation	+ 2 DEG
		cooling rate	0.7 ~ 1 /min (can be customized according to customer requirements)
temperature controller			inlet temperature controller
temperature sensor			class a Pt100 platinum resistance
refrigeration system	refrigeration compressor / mode		imported fully enclosed compressor unit / single stage compression refrigeration, two
	cooling mode		air-cooled
safety protection measures			over temperature, overload, over voltage, leakage, short circuit protection
material	box / insulation material		shell of cold rolled steel plate electrostatic spray tank, SUS304 stainless steel plate / superfine glass cotton
standard configuration			of 50 test holes of a sample of two sets of shelf, lamp
Product standard			GB/T 10589-2008: low temperature test chamber
test method			GB/T2423.1, GB/T2423.2, GB2423.22, GJB150.3, GJB150.4